Best dock for Nintendo Switch 2 - which third-party docks actually work

As an Amazon Associate I earn from qualifying purchases.

Best dock for Nintendo Switch 2? Choose a model described for Switch 2

Look for a dock that the manufacturer explicitly describes as compatible with Switch 2. SiWiQU is the most commonly bought, and if software updates matter to you, take a look at GuliKit.

Connect a Nintendo power adapter or a 60-65 W USB-C PD charger to the dock. With this setup, TV mode has the best chance of working without any fiddling.

A dock from the original Switch is not suitable for the new console, so there is no point looking for one in a drawer. A second dock for the bedroom or for trips has to be bought with Switch 2 in mind.

Why many replacements did not work

According to Tom's Hardware, Switch 2 uses its own protocol on the USB-C port. That is why most third-party docks simply did not work at launch, even though the plug fits.

Notebookcheck examined the console's USB-C port and showed that third-party accessories do not send the codes Switch 2 expects. The console does not recognize them, so it does not switch to the picture on the TV.

At first, the Antank S3 Max worked, sold on Amazon also as the SiWiQU TV Dock. That is where SiWiQU's popularity comes from: it was one of the first docks to get along with the new console.

The problem returned after a system update. Nintendo Life wrote in November 2025 that one of the updates broke some of the replacements. Nintendo then stated that it does not intend to hinder the operation of legitimate third-party docks.

No one can guarantee that a particular dock will work after every future update. That is why a manufacturer that releases fixes is a real advantage. In the case of GuliKit, according to the manufacturer, such updates are available.

Below we have gathered docks that we selected based on whether the manufacturer describes them for Switch 2, how often they are bought, and what they are useful for: the living room, the bedroom, or travel.

Recommended docks for Nintendo Switch 2

Dock power: how many watts and which power adapter

Nintendo states that without a licensed power adapter, TV mode requires an adapter rated at 54 W or more. The original Switch 2 dock is model BEE-005, and its power adapter is labeled NGN-01.

JSAUX, on the other hand, says the dock needs 20 V power to enable TV mode. So in practice, look for a USB-C PD 60-65 W charger with 20 V output.

Fun fact: for TV mode, Nintendo requires an adapter of at least 54 W, and the old Switch power adapter does not deliver that.

The old power adapter (HAC-002) charges the console directly, but it will not power it in the dock. If you do not want to look for a separate charger, consider a bundle like BINBOK, which according to the manufacturer includes a dock, a 60 W charger and an HDMI cable.

You can find more about choosing a power adapter in a separate article about the charger for Switch 2.

The old dock from Switch 1 and what to check after an update

The Nintendo Switch dock set (Dock Set) from the first Switch is still on sale, but it does not fit Switch 2. It is easy to get confused, because it looks familiar and still has its place in stores.

Fun fact: the dock from the first Switch does not work with Switch 2, even though both consoles have USB-C.

After a major console update, check the dock manufacturer's website. If the picture suddenly disappears, first check whether a new software version or a notice about issues has been released.

Small models are handy for travel: according to the manufacturers, AGFINEST comes as an adapter with a USB-A port, and pdobq is a lightweight dock with an HDMI output. Remember that TV mode requires a suitable power adapter.

Frequently asked questions about Switch 2 docks

Which docking station for Nintendo Switch 2?

Choose a dock described explicitly for Switch 2. SiWiQU is the most frequently bought, and GuliKit has software updates according to the manufacturer. For both, connect a Nintendo power adapter or a 60-65 W charger.

Does the dock from the first Switch fit Switch 2?

No. Nintendo states on its support pages that the dock from the first Switch does not work with Switch 2. The Dock Set is still on sale, but it is intended for the older console.

Does a Switch 2 dock replacement work after an update?

It varies. One update broke some third-party docks, although Nintendo assured that it does not intend to hinder the operation of legitimate docks. After a major update, check the dock manufacturer's website.

Which power adapter for a Switch 2 dock?

Ideally a Nintendo power adapter or a USB-C PD 60-65 W charger with 20 V output. Nintendo requires at least 54 W for TV mode. The old Switch power adapter (HAC-002) is not enough in the dock.

Does the SiWiQU dock work with Switch 2?

Tom's Hardware wrote in 2025 that the Antank S3 Max version, also sold as the SiWiQU TV Dock, worked with the console at launch. However, nothing can be promised after later system updates.

See also

• Best power bank for Nintendo Switch 2 - how many watts it really draws
• Best microSD card for Nintendo Switch 2 - only microSD Express works
• Best charger for Nintendo Switch 2 - will the old Switch adapter do?
• Best docking station for Legion Go 2 - official or cheaper
• Best docking station for Steam Deck OLED - 4K 120 Hz on your TV

Sources

• Nintendo Support: Compatibility of Nintendo Switch with Nintendo Switch 2 - manufacturer page (en-americas-support.nintendo.com)
• Nintendo Support: No video output to TV in TV Mode on Nintendo Switch 2 - manufacturer page (en-americas-support.nintendo.com)
• Tom's Hardware: Most third-party docks won't work with Switch 2 - industry article (tomshardware.com)
• Notebookcheck: Why a third-party Switch 2 dock won't work - industry article (notebookcheck.net)
• Nintendo Life: Nintendo had no intention to hinder third-party docks - industry article (nintendolife.com)
• GamesRadar: Switch 2 docks require a 20V power input for TV mode - industry article (gamesradar.com)