Which charger for Nothing Phone (4a) - what really charges fast

Updated: 02.10.2026

As an Amazon Associate I earn from qualifying purchases.

Which charger for Nothing Phone (4a)? Power ratings and fast charging specs

If you are wondering which charger for Nothing Phone (4a) will get you maximum speed without wasting money, the answer is simple. The phone tops out at 50W charging, and it uses standard USB Power Delivery (USB PD) with Programmable Power Supply (PPS). A regular USB PD charger without PPS also reaches the full 50W, so you have plenty of flexible options.

Nothing includes a USB-C cable and a protective case in the box, but you will not find a wall plug inside. If you plug the device into an old basic USB brick without fast charging standards, power drops to a crawl at roughly 5W to 10W. Getting a proper power adapter is the key to unlocking the phone's full potential.

Fun fact: Nothing intentionally designs its devices with visible internal components and standard protocols to push back against proprietary industry habits that lock buyers into one brand.

Specs and charging

The key Nothing Phone (4a) specs that matter when choosing a charger:

• Battery: 5080 mAh, litowo-jonowa
• Wired charging: 50 W (USB PD 50 W (PPS))
• On a standard USB PD charger: ~50 W
• Reverse charging: 7.5 W

Can you use an adapter from your drawer with this phone?

Before spending extra money, check what chargers you already keep around the house. Take a close look at the tiny print on the back or bottom of your existing adapters to see what they can deliver:

• A USB-C laptop power supply (65W or 100W): Excellent news. Modern laptop adapters use the standard USB PD protocol. They will safely deliver the maximum 50W speed to your phone and step down naturally.
• A 20W or 30W adapter from an older phone: It works completely fine via USB PD, but you will get capped at that adapter's ceiling (20W or 30W). Expect top-ups to take around 80 to 90 minutes.
• A proprietary charger from brands like OnePlus, Oppo, or Realme: Unless that specific brick explicitly lists USB PD on its specification label, it will drop to a slow fallback mode of just 5W to 10W.
• An old rectangular USB-A wall plug: Avoid these for daily charging. They lack modern USB PD protocols and will keep your phone plugged in for hours.

Real charging speeds: how fast does it fill up?

In lab measurements using a 68W PD adapter, the phone drew a peak of roughly 42W at the socket. That is very close to the 50W theoretical maximum, and it translates into rapid real-world recovery when you are short on time.

Official manufacturer figures state that the battery hits 50% in just 22 minutes, reaching a full 100% charge in 64 minutes. Independent tests by GSMArena show similar real-life performance: 38% after 15 minutes, 64% after 30 minutes, and a complete top-up to 100% in 1 hour and 6 minutes. A quick morning boost while making coffee gives you enough battery to run all day.

Selecting the best adapter for your setup

If you want the most affordable way to get full speed, pick the Motorola TurboPower 68W. It provides the full 50W speed for this phone and carries enough spare capacity to power a USB-C laptop when needed.

For everyday travel where you want to power multiple items from a single wall socket, the UGREEN Nexode 65W or the Anker 735 (Nano II 65W) are top picks with 3 ports each. Both deliver the phone's maximum 50W power effortlessly. If you want a bit more headroom, the Anker Nano Charger 70W 3-Port handles multiple gadgets simultaneously, while the UGREEN Nexode 100W with 4 ports easily covers your phone, laptop, and wireless earbuds all at once.

1. Motorola TurboPower 68W (68W GaN)

Cheapest at full speed · Enough power for a USB-C laptop

68W GaN charger. With the Nothing Phone (4a) it charges at up to about 50 W via USB PD (100% of the phone's maximum power, estimate based on specs and protocols).

See Motorola TurboPower 68W on Amazon →

2. UGREEN Nexode 65W (65W GaN)

3 ports - several devices at once · Enough power for a USB-C laptop

65W GaN charger. With the Nothing Phone (4a) it charges at up to about 50 W via USB PD (100% of the phone's maximum power, estimate based on specs and protocols).

See UGREEN Nexode 65W on Amazon →

3. Anker 735 (Nano II 65W) (65W GaN)

3 ports - several devices at once · Enough power for a USB-C laptop

65W GaN charger. With the Nothing Phone (4a) it charges at up to about 50 W via USB PD PPS (100% of the phone's maximum power, estimate based on specs and protocols).

See Anker 735 (Nano II 65W) on Amazon →

4. Anker Nano Charger 70W 3-Port (B121A) (70W GaN)

3 ports - several devices at once · Enough power for a USB-C laptop

70W GaN charger. With the Nothing Phone (4a) it charges at up to about 50 W via USB PD (100% of the phone's maximum power, estimate based on specs and protocols).

See Anker Nano Charger 70W 3-Port (B121A) on Amazon →

5. UGREEN Nexode 100W (100W GaN)

4 ports - several devices at once · Enough power for a USB-C laptop

100W GaN charger. With the Nothing Phone (4a) it charges at up to about 50 W via USB PD PPS (100% of the phone's maximum power, estimate based on specs and protocols).

See UGREEN Nexode 100W on Amazon →

Important details to keep in mind before you buy

While Nothing recommends using a PPS-compatible charger for ideal thermal management, a standard USB PD brick with fixed voltages will also provide the full 50W. You do not need to hunt down rare specialty adapters to get full performance.

Watch out for fast chargers that use closed, proprietary protocols without standard USB PD support. These plugs may claim 67W or 80W on the box, but plugged into a Nothing phone, they might only deliver 10W. Stick strictly to universal USB PD or PD PPS adapters, and you will get top speeds every time.

Common questions about powering your Nothing Phone (4a)

Which charger for Nothing Phone (4a) gives the maximum charging speed?

Any universal USB PD adapter rated for 50W or higher that supports PPS or standard fixed PD voltages will give you maximum speed. Models like the Motorola TurboPower 68W or UGREEN Nexode 65W hit this ceiling completely.

Does the phone come with a wall charger in the box?

No, there is no wall charger included in the packaging. You get a USB-C cable and a protective case, meaning you must provide your own fast-charging wall adapter.

Can I safely charge this phone with a 65W or 100W laptop charger?

Yes, completely safely. USB Power Delivery involves direct communication between the phone and the charger, so the phone will draw only what it can take, maxing out at roughly 50W.

Does the Nothing Phone (4a) support wireless charging?

No, this model does not feature wireless charging. Fast wired charging via USB-C is the primary method to power up the device.

How long does a complete recharge take from empty?

Official specifications indicate a full charge in 64 minutes, while testing by GSMArena clocked a full cycle in 1 hour and 6 minutes. In just 30 minutes, you can expect the battery to reach around 64% capacity.

Chargers for the other models in this series

• Which charger for Nothing Phone (4b) - ranking of compatible chargers
• Which charger for the Nothing Phone (3a) Pro? The best models

Sources

• Nothing Phone (4a) - nothing.tech - official manufacturer specifications (nothing.tech)
• Nothing Phone (4a) - gsmarena.com - industry article (gsmarena.com)
• Nothing Phone (4a) - expertreviews.co.uk - industry article (expertreviews.co.uk)
• Nothing Phone (4a) - techradar.com - industry article (techradar.com)
• Nothing Phone (4a) - bgr.com - industry article (bgr.com)