As an Amazon Associate I earn from qualifying purchases.
Quick answer: our top pick is ARCTIC M2 Pro M.2 SSD heatsink (M.2 2280 heatsink · TP-3 pads · tool-free installation).
Best heatsink for a PS5 SSD? A thin one, up to 11.25 mm including the drive
Got an M.2 drive without a heatsink and not sure what to add? Pick a thin heatsink that fits within 11.25 mm together with the drive. The easiest choice is one the manufacturer clearly describes as made for the PS5.
This applies to the PS5, PS5 Slim and PS5 Pro. All of them accept an extra M.2 NVMe PCIe 4.0 drive, but Sony has one condition: the drive must have cooling.
A regular heatsink from a PC store is a gamble. It can be too tall, and then the slot cover simply won't close. A model designed for the PS5 saves you that trouble.
PS5 storage in general is covered in a separate article. Here we only deal with cooling.
What Sony says about cooling and height
In Sony's help pages, the cooling can be a heatsink or a thermal conductive plate. There's no requirement for any specific type. What matters is that the drive has some.
The height of the drive with cooling can't exceed 11.25 mm. Of that, at most 8 mm may sit above the drive's board, and 2.45 mm is left below it. The width with the heatsink is 25 mm at most.
The slot takes drives from 2230 to 22110 in length. You'll most often see 2280, and that size has the most heatsinks available.
Fun fact: be quiet! states plainly that its standard MC1 heatsink fits the PS5, while the larger MC1 Pro is too tall for the console.
Before you choose a heatsink, check three things on your drive:
- Length: the marking on the label, for example 2280, must match the size of the heatsink.
- One side or two: if the memory chips sit on both sides of the board, you need a solution that also fits underneath.
- Factory heatsink: if the drive already has one, you don't need to buy anything else.
Below we've collected heatsinks chosen for one condition: they either fit within Sony's limit or are described as made for the PS5.
The PS5 SSD heatsinks we recommend
1. ARCTIC M2 Pro M.2 SSD heatsink
M.2 2280 heatsink · TP-3 pads · tool-free installation
The most-bought M.2 heatsink in this roundup. You fit it on a 2280 drive without tools, and the thermal pads come in the box.
2. SABRENT SB-PSHS
Aluminium heatsink for PS5 · replaces the slot cover
A heatsink for SSDs without factory cooling. It replaces the PS5's expansion slot cover, so the console's own fan cools it.
Heatsink under the cover or instead of the cover
There are two kinds of heatsinks for the PS5. The first is a thin heatsink that goes on the drive, and you close everything up with the original slot cover. The second replaces the cover, so you don't have to worry about whether anything closes.
The first kind is convenient because the console looks the same after installation as it did before. Watch the height, though. Every millimeter over the limit means a cover that won't sit properly. With universal heatsinks, check the manufacturer's specs and compare the height with Sony's limit. Store listings sometimes only say that a model fits the PS5, and you have to check the numbers yourself.
The second kind is for you if you don't mind the original cover ending up in a drawer. Availability of these models can vary by country.
Fun fact: a heatsink that replaces the metal slot cover is cooled directly by the console's fan, because the air flows around it with nothing in the way.
In short: if you want to keep the console in its factory state, pick a thin heatsink that goes under the cover and check its height. If you prefer simplicity, go for a model that replaces the cover.
Step-by-step installation and thermal pads
Get a Phillips #1 screwdriver, which is what Sony specifies. Turn the console off completely and unplug it before you remove the cover.
- Put the heatsink on the drive before you insert it into the console. The thermal pad should sit flat against the memory chips and the controller.
- Remove the expansion slot cover and slide the drive into the M.2 slot.
- Screw the drive down at the spot that matches its length.
- Put the slot cover back on. If it goes on without resistance, the height is fine.
- Reassemble the console and turn it on. The console will offer to format the drive.
The pad on the underside of the drive is only needed if the drive is double-sided. And only if the drive with the pad fits within that 2.45 mm below the board. With a single-sided drive you can skip it.
If the heatsink has to snap onto the drive, do it slowly and evenly, without pressing on the chips. The drive's board is thin and easy to bend.
A drive with a factory heatsink as the second option
Don't want to fiddle with a separate heatsink? Buy a drive that already has one built in. Put it in, screw it down and close the cover.
Sony notes that you shouldn't add a second heatsink to a drive that already has one. The total height still has to fit within 11.25 mm, so on the packaging check not only the capacity and speed, but the dimensions too.
According to Tom's Hardware and GamesRadar, drives without a heatsink, for example popular models sold without cooling, work in the PS5 once you add a thin heatsink. If you already have a drive like that, you don't need to replace it.
Frequently asked questions about SSD heatsinks for the PS5
Which heatsink for an SSD in the PS5?
One that fits within 11.25 mm together with the drive and is up to 25 mm wide. The easiest option is a model the manufacturer describes as made for the PS5. If you buy a universal heatsink, check its height in the manufacturer's specs.
Does an M.2 drive in the PS5 need a heatsink?
Yes, Sony requires the drive to be cooled. A heatsink or a thermal conductive plate is enough. Drives with a factory heatsink already have this covered.
What is the maximum heatsink height in the PS5?
The total height of the drive with its cooling is 11.25 mm. You get up to 8 mm above the drive's board and 2.45 mm below it. Going over the limit ends with a cover that won't close.
Will a heatsink fit under the PS5 slot cover?
It will, if it stays within Sony's limit. Heatsinks not designed for the PS5 can be too tall. Choose a model described for the PS5, or swap the cover for a heatsink that replaces it.
Can you put a heatsink on a drive that has a factory heatsink?
No, Sony doesn't allow adding a second heatsink to such a drive. The factory cooling is enough, and an extra layer would push the height over the limit.
See also
Sources
- PlayStation Support: How to add M.2 SSD storage to PS5 - manufacturer page (playstation.com)
- be quiet!: MC1 M.2 SSD cooler is compatible with PlayStation 5 - manufacturer page (bequiet.com)
- Mighty Gadget: Best PS5 compatible SSD heatsinks - industry article (mightygadget.com)
- GamesRadar: Best PS5 heatsink - industry article (gamesradar.com)
- Tom's Hardware: Best PS5 SSDs - industry article (tomshardware.com)












Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.