Which wireless charger for iPhone 18 Pro? 25W MagSafe and a 35W adapter

Which wireless charger for iPhone 18 Pro?

For iPhone 18 Pro, it is best to buy a 25 W MagSafe charger or a Qi2 model paired with a USB-C power adapter of at least 35 W. Such a setup lets you charge from zero to 50% in about 30 minutes. You will not find a power adapter in the box with the phone, so you need to purchase it separately or use a powerful wall charger you already have at home.

Both iPhone 18 Pro and the larger iPhone 18 Pro Max share identical wireless charging specifications. When choosing an accessory, look for MagSafe 25 W or Qi2 25 W markings, as older wireless chargers will limit speeds to 15 W or even 7.5 W. The new standard provides a noticeable boost in convenience, bringing cable-free charging closer to what until recently was offered only by traditional cables.

Fun fact: For iPhone 18 Pro models, Apple officially states a wireless charging time to 50% using a 35 W power adapter, whereas the iPhone 17 specifications cited a 30 W adapter to achieve the same result.

Is a MagSafe or Qi2 charger from an older iPhone enough?

If you already have a 25 W MagSafe or Qi2.2 charger purchased for iPhone 16 or iPhone 17, you do not need to replace it with a new one. It will work with iPhone 18 Pro at the full 25 W output, as long as you connect it to a sufficiently powerful power brick.

The requirement for achieving maximum speed is a 30-35 W power adapter. If your existing charger was plugged into an old 20 W brick, the phone will charge without issue, but it will not reach the advertised 25 W. Therefore, instead of buying a whole new magnetic setup, it is often enough to simply purchase a more powerful wall adapter.

Older first-generation Qi pads or 15 W MagSafe chargers will also work with the new phone. The magnets will align the phone in the right spot, but charging the battery will take noticeably longer.

Wireless or cable - which to choose for everyday use?

Wireless charging wins on convenience at a desk or nightstand, but a traditional cable remains unbeatable when you are short on time. According to official data, wired charging on iPhone 18 Pro allows you to charge the battery to 50% in about 15 minutes if you use a 60 W or more powerful power adapter.

The difference is also evident when charging to full capacity. In a test conducted by MacRumors, iPhone 18 Pro Max connected via cable reached a peak power of 52 W and charged to 100% in 55 minutes. Wireless 25 W is great for routinely setting down your phone throughout the day, but a cable is far better before heading out in a hurry.

Fun fact: In an independent MacRumors test, iPhone 18 Pro Max charged to full via cable 26 minutes faster than iPhone 17 Pro Max, which required 81 minutes.

Temperature and cooling during wireless charging

Delivering 25 W wirelessly generates heat, which is a natural byproduct of induction. Modern smartphones protect the battery cell from overheating, and as temperature rises, the electronics automatically throttle the charging power. In practice, this can prolong the time needed to recharge.

For this reason, more and more chargers with active cooling are appearing on the market, featuring built-in fans or cooling modules. Such a solution draws heat away from the phone's chassis, helping maintain full 25 W power for longer, which is especially useful when charging in a warm room or using the device for navigation.

Below, we have selected proven magnetic accessories that meet the requirements of iPhone 18 Pro and allow you to take full advantage of its wireless charging capabilities.

Recommended wireless chargers for iPhone 18 Pro

As an Amazon Associate I earn from qualifying purchases.

Questions and answers about iPhone 18 Pro charging

Does iPhone 18 Pro have 25 W wireless charging?

Yes, iPhone 18 Pro supports wireless charging up to 25 W. This applies to both MagSafe technology and the open Qi2 standard. To achieve this speed, the charger must support this power profile and be connected to a sufficiently powerful power adapter.

Which power adapter for the MagSafe charger for iPhone 18 Pro?

For a 25 W MagSafe charger, you need a USB-C power adapter with a minimum of 35 W. According to Apple data and 9to5Mac tests, this configuration allows you to charge the battery from zero to 50% in about 30 minutes. 20 W power adapters will also work, but the phone will charge more slowly.

Will an iPhone 17 MagSafe charger work with iPhone 18 Pro?

Yes, a 25 W MagSafe or Qi2.2 charger purchased for iPhone 17 will work with the new model at full power. You just need to connect it to a 30-35 W power adapter. All magnets and electrical specifications are fully compatible.

Does iPhone 18 Pro Max charge wirelessly faster than 18 Pro?

No, both models have identical wireless charging specifications and accept a maximum of 25 W. According to Apple specifications, both charge wirelessly up to 50% in about 30 minutes using a 35 W or more powerful power adapter. The larger battery in Pro Max does not mean higher wireless charging power.

How long does it take to charge iPhone 18 Pro wirelessly?

Wireless charging from 0 to 50% takes about 30 minutes using a 25 W MagSafe or Qi2 charger and a 35 W power adapter. This time is confirmed by official manufacturer data and tests by 9to5Mac. With a weaker power adapter, the process will take correspondingly longer.

Sources

• Apple: iPhone 18 Pro - Technical Specifications - manufacturer page (apple.com)
• 9to5Mac: How to fast charge iPhone 18 Pro - industry article (9to5mac.com)
• MacRumors: iPhone 18 Pro Max charging speed test - industry article (macrumors.com)
• GSMArena: Apple iPhone 18 Pro Max review, battery - industry article (gsmarena.com)
• Macworld: Which magnetic wireless speed is my iPhone - industry article (macworld.com)