Updated: 07.10.2026
As an Amazon Associate I earn from qualifying purchases.
Quick answer: Which charger for POCO M8 Pro? The best choice is XIAOMI 120W HyperCharge Combo Type-A EU Ultra-Fast Wall Charger 120 W - about 100% of the maximum charging speed (phone: max 100 W).
See XIAOMI 120W HyperCharge Combo Type-A EU Ultra-Fast Wall Charger on Amazon →
Which charger for POCO M8 Pro? Power standards and real charging speeds
You just unboxed your POCO M8 Pro, but the European retail box comes with only a USB-C cable inside. If you are wondering which charger for POCO M8 Pro will give you the full 100 W advertised speed, the answer depends entirely on the charging protocol of the adapter you choose.
The phone relies on two methods to hit top speed: Xiaomi HyperCharge and universal USB Power Delivery with PPS (Programmable Power Supply). Both can push up to 100 W, provided your wall plug supports the correct voltage and current profiles.
This quick guide explains what to look for on your existing plugs and which adapters will charge your phone without compromise.
Fun fact: In GSMArena testing, the POCO M8 Pro reached 83% battery after 30 minutes, higher than the Redmi Note 15 Pro+ (78%) with the same 6500 mAh battery and 100 W charging.
Specs and charging
The key POCO M8 Pro specs that matter when choosing a charger:
- Battery: 6500 mAh
- Wired charging: 100 W (Xiaomi HyperCharge 100 W)
- Reverse charging: 22.5 W
Can you use the wall adapter you already have at home?
Before spending money on a new plug, check the small text printed on the adapters you already own. Here is what to expect when plugging them into your POCO M8 Pro:
- Official Xiaomi or POCO chargers: A high-power brick like the Xiaomi 120W HyperCharge adapter fully recognizes the phone's protocol and delivers the maximum 100 W output.
- Standard USB-C laptop bricks: Most generic 65 W or 100 W laptop chargers offer standard USB PD without PPS. The phone will charge on them, but at a noticeably lower rate because it cannot negotiate its dedicated high-speed profiles.
- Third-party PPS chargers: The phone requires a PPS window of up to 20 V / 5 A for top performance. If a 100 W charger caps its PPS output at lower amperage, speed drops - for example, the Anker Nano 100W reaches around 55 W, the Anker 735 provides around 52 W, and the UGREEN Nexode 65W delivers roughly 49.5 W.
- Basic 20 W phone chargers: Small plugs from older phones will safely charge the M8 Pro, but filling its large battery will take significantly longer.
Real-world charging speeds: how fast does the battery fill up?
POCO states that a full charge from zero to 100% takes about 40 minutes under optimal conditions. Independent measurements confirm just how capable this charging system is when paired with the right hardware.
In tests conducted by GSMArena with a Xiaomi 100 W charger, the phone reached 46% in 15 minutes, 83% in 30 minutes, and completed a 0 to 100% charge in 47 minutes. Testing by Tech Advisor showed a jump from 23% to 94% in just 30 minutes.
In everyday use, a quick 15-minute morning top-up while drinking coffee puts nearly half a tank into the battery, easily carrying you through a full day of standard use.
Fun fact: To keep thermals low right out of the box, POCO keeps the absolute fastest charging speed turned off by default; you have to manually toggle Top Speed in your battery settings to get those sub-50-minute results.
Which power adapter should you add to your cart?
If you want original hardware at the lowest cost for full 100 W speed, choose the XIAOMI 120W HyperCharge Combo Type-A EU Ultra-Fast Wall Charger. It maxes out your phone at around 100 W and comes as a kit: a USB-A charging brick bundled with a USB-C cable.
If you prefer an all-round multi-port hub for travel, the UGREEN Nexode 100W also reaches approximately 100 W on this phone while letting you plug in up to four devices at once.
If you are fine with roughly half speed in exchange for a smaller footprint, multi-port options like the Anker Nano 100W (around 55 W), the Anker 735 (around 52 W), or the UGREEN Nexode 65W (around 49.5 W) remain practical choices for daily use.
| Charger | Power | Estimated speed |
|---|---|---|
| XIAOMI 120W HyperCharge Combo Type-A EU Ultra-Fast Wall Charger | 120 W | 100% |
| UGREEN Nexode 100W | 100 W | 100% |
| Anker Nano 100W (3 Ports, Smart Display) | 100 W | 55% |
| Anker 735 (Nano II 65W) | 65 W | 52% |
| UGREEN Nexode 65W | 65 W | 50% |
1. XIAOMI 120W HyperCharge Combo Type-A EU Ultra-Fast Wall Charger (120W)
Original XIAOMI charger · Cheapest at full speed · Enough power for a USB-C laptop
120W charger. With the POCO M8 Pro it charges at up to about 100 W via HyperCharge (100% of the phone's maximum power, estimate based on specs and protocols).
See XIAOMI 120W HyperCharge Combo Type-A EU Ultra-Fast Wall Charger on Amazon →
2. UGREEN Nexode 100W (100W GaN)
4 ports - several devices at once · Enough power for a USB-C laptop
100W GaN charger. With the POCO M8 Pro it charges at up to about 100 W via USB PD PPS (100% of the phone's maximum power, estimate based on specs and protocols).
3. Anker Nano 100W (3 Ports, Smart Display) (100W GaN)
3 ports - several devices at once · Enough power for a USB-C laptop
100W GaN charger. With the POCO M8 Pro it charges at up to about 55 W via USB PD PPS (55% of the phone's maximum power, estimate based on specs and protocols).
4. Anker 735 (Nano II 65W) (65W GaN)
3 ports - several devices at once · Enough power for a USB-C laptop
65W GaN charger. With the POCO M8 Pro it charges at up to about 52 W via USB PD PPS (52% of the phone's maximum power, estimate based on specs and protocols).
5. UGREEN Nexode 65W (65W GaN)
3 ports - several devices at once · Enough power for a USB-C laptop
65W GaN charger. With the POCO M8 Pro it charges at up to about 49.5 W via USB PD PPS (50% of the phone's maximum power, estimate based on specs and protocols).
What to watch out for when powering the POCO M8 Pro
Getting 100 W on this phone requires specific conditions, and a few small details can slow your charging down unexpectedly:
- The Top Speed toggle in settings: Maximum speeds are locked behind a software setting. Head to your battery settings menu and switch on Top Speed, otherwise charging speeds will remain dialed back to stay cooler.
- Cable current ratings: Reaching 100 W demands high electrical current. You need a cable rated for 5 A to 6 A; pairing a high-end charger with an ordinary 3 A cable will immediately cap your wattage.
- PPS amperage limits: Standard 100 W labels can be deceiving. If a third-party PPS charger does not provide 5 A in its variable profile, the phone settles for lower power, which is why some 100 W plugs max out at roughly 55 W on this model.
- Other brand proprietary plugs: Fast chargers from OnePlus, Vivo, or Samsung will not trigger 100 W on the POCO M8 Pro, defaulting instead to slower standard charging.
POCO M8 Pro charging questions answered
Which charger for POCO M8 Pro delivers the maximum 100W speed?
To hit the full 100 W rate, you need either an official Xiaomi 120W HyperCharge wall adapter or a compatible USB PD PPS charger capable of 20 V / 5 A, such as the UGREEN Nexode 100W. Standard adapters without PPS will charge the phone significantly slower.
Is a wall charger included in the POCO M8 Pro box?
No, the European retail version of the POCO M8 Pro does not include a power adapter. The box contains only the phone and a USB-C cable, so you need to provide your own compatible charger.
Why does my 100W third-party charger only deliver around 55W?
The POCO M8 Pro requires a 5 A current profile over PPS to reach its 100 W ceiling. Many multi-port 100 W chargers limit their PPS current to 3 A, which restricts the charging rate on this phone to roughly 52 W to 55 W.
How long does it take to fully charge the POCO M8 Pro?
The manufacturer specifies roughly 40 minutes for a complete charge. In independent testing with a Xiaomi 100 W charger, the battery reached 46% in 15 minutes, 83% in 30 minutes, and finished a full 0-100% charge in 47 minutes with the Top Speed mode enabled.
Does the POCO M8 Pro support wireless charging?
No, the POCO M8 Pro does not support wireless induction charging. All charging is handled exclusively through its USB-C port via HyperCharge or USB Power Delivery PPS.
Sources
- POCO M8 Pro - mi.com - official manufacturer specifications (mi.com)
- POCO M8 Pro - gsmarena.com - industry article (gsmarena.com)
- POCO M8 Pro - techadvisor.com - industry article (techadvisor.com)
- POCO M8 Pro - androidheadlines.com - industry article (androidheadlines.com)













Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.