As an Amazon Associate I earn from qualifying purchases.
Quick answer: Which charger for Fairphone Gen. 6+? The best choice is INIU 65W 3-Port Charger 65 W - about 100% of the maximum charging speed (phone: max 27 W). A regular USB-PD charger also delivers full power.
Which charger for Fairphone Gen. 6+? The practical guide
Which charger for Fairphone Gen. 6+ should you pick? Any adapter with USB Power Delivery (USB PD) and at least 27W of output will do. The phone tops out at 27W whether the charger uses PPS (Programmable Power Supply) or standard fixed voltages, so you do not need an expensive, specialized brick to get full charging speed.
Fairphone went the eco route here: the box holds only the phone, a SIM tool, and paper documentation. There is no charger and no USB-C cable, so if you do not have a working USB-C plug at home, you will need to buy one.
Fun fact: The 4415 mAh lithium-ion battery in the Gen. 6+ can be swapped by the user, and the phone has 12 user-replaceable parts in total.
Below you will find out whether an adapter from your drawer will work, and which model to buy if it will not.
Specs and charging
The Fairphone Gen. 6+ specs that matter when choosing a charger:
- Battery: 4415 mAh
- Wired charging: 27 W (USB PD / Quick Charge 27 W)
- On a standard USB PD charger: ~27 W
Can you use an old power adapter from your drawer?
Before buying anything, check the small print on the plugs you already own. The Fairphone Gen. 6+ is fairly flexible, but the power you get depends on the standard your old adapter uses:
- Standard USB PD power brick (e.g., 30W or higher): Delivers the full 27W. Standard fixed-voltage USB PD gives you 100% of the phone's charging speed, just like PPS.
- USB PD PPS or Quick Charge 4 adapter: Also reaches the full 27W maximum without any restrictions.
- Apple 20W iPhone plug: It will charge your Fairphone reliably, but capped at roughly 20W rather than the 27W ceiling.
- USB-C laptop charger (45W, 65W, or 100W): Completely safe and effective. The phone negotiates power via USB PD and draws its top 27W limit.
- Older rectangular USB-A brick (without fast charging protocols): Supplies only around 5W to 10W. Charging will be noticeably slow, making it suitable mainly for overnight use.
Which plug makes the most sense for your everyday setup?
If you want one travel plug for both your phone and a work laptop, get the UGREEN Nexode 65W. It gives the phone its full 27W and leaves plenty of power for the computer.
For a desk with several devices, the UGREEN Nexode 65W and the Anker 735 (Nano II 65W) both have three ports, can charge a laptop, and still give the Fairphone Gen. 6+ its full 27W.
| Charger | Power | Estimated speed |
|---|---|---|
| INIU 65W 3-Port Charger | 65 W | 100% |
| UGREEN Nexode 65W | 65 W | 100% |
| Anker 735 (Nano II 65W) | 65 W | 100% |
1. INIU 65W 3-Port Charger (65W GaN)
Cheapest at full speed · 3 ports - several devices at once · Enough power for a USB-C laptop
65W GaN charger. With the Fairphone Gen. 6+ it charges at up to about 27 W via USB PD (100% of the phone's maximum power, estimate based on specs and protocols).
2. UGREEN Nexode 65W (65W GaN)
3 ports - several devices at once · Enough power for a USB-C laptop
65W GaN charger. With the Fairphone Gen. 6+ it charges at up to about 27 W via USB PD (100% of the phone's maximum power, estimate based on specs and protocols).
3. Anker 735 (Nano II 65W) (65W GaN)
3 ports - several devices at once · Enough power for a USB-C laptop
65W GaN charger. With the Fairphone Gen. 6+ it charges at up to about 27 W via USB PD (100% of the phone's maximum power, estimate based on specs and protocols).
Common pitfalls when powering the Fairphone Gen. 6+
The first trap is assuming any USB-A fast charger will work. Many older adapters from brands like OnePlus, Oppo, or Huawei use proprietary protocols. Plugged into the Fairphone Gen. 6+, they fall back to just 5W to 10W.
The second is the cable. Fairphone recommends a USB PD charger with PPS rated at 30W or more, paired with a 60W cable, and neither comes in the box. Make sure you have a proper cable along with the plug.
Lastly, do not worry if your charger lacks PPS. Fairphone recommends it, but the published specs show that standard USB PD without PPS also delivers the full 27W. A good standard USB PD charger is worth keeping.
Frequently asked questions
Which charger for Fairphone Gen. 6+ should I buy?
Any USB Power Delivery (USB PD) adapter rated at 30W or higher. The Fairphone Gen. 6+ draws up to 27W, so the Anker 735 or the UGREEN Nexode 65W will charge it at top speed.
Is there a charger included in the Fairphone Gen. 6+ box?
No. The box contains only the phone, a SIM ejector tool, and user manuals. You need to supply your own cable and plug or buy them separately.
Can I use my laptop's USB-C power brick?
Yes, any standard USB-C laptop charger rated at 45W, 65W, or higher is fine. The phone negotiates with the adapter over USB PD and takes its maximum of 27W.
Does the phone charge slower without PPS?
No. The Fairphone Gen. 6+ reaches its full 27W on standard USB PD fixed voltages as well as on USB PD PPS.
What happens if I use an old USB-A phone charger?
If the charger lacks USB PD or Quick Charge 4 support, the phone will draw only about 5W to 10W. It will still charge, but much more slowly.
See also
- Which charger for OPPO Find X10 / X10 Pro Max - ranking of compatible chargers
- Which charger for OnePlus 13 - choosing a GaN charger
Sources
- Fairphone Gen. 6+ - fairphone.com - official manufacturer specifications (fairphone.com)
- Fairphone Gen. 6+ - androidpolice.com - industry article (androidpolice.com)
- Fairphone Gen. 6+ - intomobile.com - industry article (intomobile.com)
- Fairphone Gen. 6+ - truthful.reviews - industry article (truthful.reviews)
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.